The following commands can be used to control your smart home devices via Google Assistant. Make sure you already connect IoT devices connected with openHAB Cloud infrastructure. Please refer to this guide page for more information.
Some of these commands below are just an example. You can modify the value, such as room name, temperature, device name, volume level, etc.
Light
“Ok Google, turn on dining room lights.”
“Hey Google, dim bedroom light by 30%.”
“Hello Google, brighten the garden lights by 20%.
“Set the living room light to 90%.”
“Are the bathroom lights are on?”
“Turn off kid’s room lamp.”
“Switch off the lights.”
Blind
“Are blinds open?”
“Open the blinds halfway.”
“Ok Google, set the awning to night mode.”
“Close all blinds.”
“Open kitchen’s blinds to 70%.”
“Set blinds to 30%.”
“Close the curtains halfway”.
“Open the window.”
Fan
“Hey Google, rais the fan speed!”
“Make the fan speed faster.”
“Is the fan turned on?”
“Stop the fan.”
“Switch on the fan.”
“What is the fan speed level?”
“Turn on dining’s room fan.”
“Set fan level to four.”
“Slow down the fan speed.”
Air purifier
“Ok Google, turn on the air purifier.”
“Is the air purifier has turned off?”
“Turn off the air purifier now.”
“Turn on the bedroom’s air purifier.”
Camera
“Hello Google, show me the camera in the baby’s room.”
“Turn on camera on the garage.”
“Is the Babycam on?”
“Turn off front door camera.”
Vacuum
“Start vacuuming now.”
“Hey Google, dock all the vacuums.”
“Ok Google, stop vacuuming.”
“Recharge the vacuums.”
“Start vacuuming dining room.”
“Which vacuum is running?”
“Is the vacuum on?”
Thermostat
“Turn on the thermostat.”
“Set the thermostat to 73 degrees.”
“Increase the temperature by 5 degrees.”
“Decrease the temperature to 71 degrees.”
“Turn down the thermostat.”
Other
“Is the coffee maker on?”
“Close the front door.”
“Make sure the front door is locked.”
“Unlock the garage door.”
“Close the pergola.”
“Turn on the fireplace.”
“Turn on Movie Mode”
“Start watering the front yard.”
“Is the upstairs closed?